Product Description Trend Lock Jig lock/jig This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood. Steel plates & body. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. inludes : 1 x Guide Bush Collar 12 x Faceplate Templates 4 x Mortice Templates 6 x Spacer Fingers SpecificationsMetric & imperial conversion: Door thickness min. 34 mm Door thickness max. 58 mm Template outer size 234.3 x 59.8 x1.5mm Includes templates for locks having the following face-plate dimensions: Metric (Imperial approx.) (D x OL) Template 22.2x156 mm (7/8"x 6 1/8") 1 22.5x152.5 mm (7/8"x 6") 2 25.4x121 mm (1"x 4 3/4") 3 25.4x127.5 mm (1"x 5") 4 25.4x133.5 mm (1"x 5 1/4") 5 25.4x145 mm (1"x 5 3/4") 6 25.4x153 mm (1"x 6") 7 25.4x156.5 mm (1"x 6") 8 25.4x165.5 mm (1"x 6 1/2") 9 25.4x177 mm (1"x 7") 10 25x57.5 mm (1"x 2 1/4") 11 UPPER 26x56.5 mm (1"x 2 1/4") 11 LOWER 25.6x162mm (1"x 6 3/8") 12 Mortise Lock Dimensions Imperial (Metric) (D x OL) Template 16x72 mm* (5/8" x 2 7/8") A 16x107 mm* (5/8" x 4 1/4") B 19x78 mm* (3/4" x 3 1/8") C 19x109 mm* (3/4" x 4 1/4") D *These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.
